topic Re: MDS Switch Return Error After TACACS+ Configuration in Network Access Control

MDS Switch Return Error After TACACS+ Configuration

azman.mansor — Fri, 13 Sep 2024 07:15:44 GMT

Hello Experts,

I'm encounter error in MDS switch after do configuration for TACACS+.

MDS switch unable to run show command and get into privilege mode. Error return below

Error: AAA authorization failed for command:show running-config, AAA_AUTHOR_STATUS_METHOD=17(0x11)

MHM Cisco World — Fri, 13 Sep 2024 07:20:18 GMT

Can I see SW config

Aaa and vty line

MHM

Aref Alsouqi — Fri, 13 Sep 2024 09:57:54 GMT

The issue might be related to wrong or missing aaa authorization commands on the switch or something wrong on the AAA server.

Please take a look at this link where it shows the basic configs for TACACS on Cisco devices:

If you got everything right in terms of configs, then you might be hitting this bug:

azman.mansor — Sun, 29 Dec 2024 15:22:11 GMT

There are miss configuration in the command line. Now everything were running fine