topic Re: Extreme Networks Wireless integration with Cisco ISE in Network Access Control

Extreme Networks Wireless integration with Cisco ISE

ysilva97 — Tue, 24 Sep 2024 17:51:28 GMT

Hello everyone! How are you?

I am performing some tests on my network by integrating an AP305C from Extreme Networks with Cisco ISE to perform corporate network authentication and later for guest networks.

Can anyone who has already done this configuration guide me or direct me on how it was configured on the ISE side to support this third-party equipment? I have already imported the Extreme dictionary and followed other documents, but without success.

Base link: https://community.cisco.com/t5/security-knowledge-base/ise-2-4-posture-using-snmp-coa-with-extreme-switches/ta-p/3641460

If anyone has done this and can support me, I would be grateful.

Re: Extreme Networks Wireless integration with Cisco ISE

ahollifield — Wed, 25 Sep 2024 13:29:17 GMT

https://cs.co/ise-interop

RADIUS is RADIUS what do you mean by "corporate network authentication"? EAP? What EAP method? Guest is going to be tricky since Extreme doesn't support dynamic URL redirection. You will need to use the ISE integrated DHCP/DNS server or use something else for Guest.

Re: Extreme Networks Wireless integration with Cisco ISE

dal — Tue, 19 Nov 2024 21:30:09 GMT

We have run Aerohive / Extreme Accesspoints with Cisco ISE as the radius server for years.
What do you want to know?