topic Re: Cisco ISE terminal length/page 0 equivalent in Network Access Control

Cisco ISE terminal length/page 0 equivalent

atsukane — Tue, 15 Oct 2024 16:19:23 GMT

Hi there,

Apologies for a primitive question here, but is there a CLI command equivalent to "terminal length 0" or "terminal page 0" on Cisco ISE?

I did see "terminal length" command under DO section on the Cisco documentation, however, upon issuing it on the ISE node it does not accept it.

Thanks in advance.

Aref Alsouqi — Tue, 15 Oct 2024 16:41:00 GMT

What version of ISE you are on? I think starting from 3.2 the new command is "screen-length".

atsukane — Tue, 15 Oct 2024 19:36:31 GMT

Hi @Aref Alsouqi , our one is v3.2 and "screen-length" did the trick!

Thanks very much!

Aref Alsouqi — Wed, 16 Oct 2024 08:22:41 GMT

You're very welcome.

Aref Alsouqi — Wed, 16 Oct 2024 08:23:57 GMT

Please take a look at this link that has some useful information about some changes on ISE 3.2 CLI:

atsukane — Wed, 16 Oct 2024 09:35:45 GMT

thanks, that's very helpful 🙂

Aref Alsouqi — Wed, 16 Oct 2024 09:42:15 GMT

You're welcome and glad I could help.