topic Re: CIsco ISE 3.3 endpoint report Failure in Network Access Control

CIsco ISE 3.3 endpoint report Failure

james.tribble — Fri, 13 Dec 2024 18:13:18 GMT

Running ISE 3.3 Patch 4

I am trying to enter required information in the description field when Trying to Schedule a report. It shows the format and I follow that to the letter. When I try and save it gives me the error "you have entered text that appears to contain unsupported tags or markup language" After many attempts I found the only thing it will accept is "-", "." and alphanumeric. It will not allow spaces or carriage returns or any of the accepted characters.

Re: CIsco ISE 3.3 endpoint report Failure

Mark Elsen — Sat, 14 Dec 2024 07:33:13 GMT

- Mentioned in various bug reports; seemingly older versions at first glance but check it out :
https://bst.cloudapps.cisco.com/bugsearch?pf=prdNm&kw=you%20have%20entered%20text%20that%20appears%20to%20contain%20unsupported%20tags%20or%20markup%20language&bt=custV&sb=anfr&prdNam=Cisco%20Identity%20Services%20Engine

Re: CIsco ISE 3.3 endpoint report Failure

thomas — Sat, 14 Dec 2024 15:07:25 GMT

Please provide an example of what you are typing so we cannot reproduce your errors or not.

Yes, failed for me too with "Report Scheduling Test" and "Report_Scheduling_Test" in ISE 3.3p4 with the error "Schedule name should only contain alphanumeric and _ - . characters"

Then with

I still got

You should contact TAC with bugs like this.

Re: CIsco ISE 3.3 endpoint report Failure

zsgbrt4 — Sat, 21 Dec 2024 15:09:12 GMT

@james.tribble wrote:
Running ISE 3.3 Patch 4
I am trying to enter required information in the description field when Trying to Schedule a report. It shows the format and I follow that to the letter. When I try and save it gives me the error "you have entered text that appears to contain unsupported tags or markup language" After many attempts I found the only thing it will accept is "-", "." and alphanumeric. It will not allow spaces or carriage returns or any of the accepted characters. Geometry Dash APK 2.2

The description field seems to have strict formatting restrictions, allowing only alphanumeric characters, "-", and ".". It doesn't support spaces, carriage returns, or other special characters. Try using underscores "_" or hyphens "-" instead of spaces, and avoid any unsupported tags or markup.