topic Re: Cisco ise integrate with brocade switch in Network Access Control

Cisco ise integrate with brocade switch

jewfcb001 — Thu, 08 Aug 2024 06:29:23 GMT

Hi All,

We try to integrate Cisco ise with brocade switch for radius authentication device. But after done the configuration can login brocade switch but cannot configure. Please help for my concern.

Re: Cisco ise integrate with brocade switch

JPavonM — Thu, 08 Aug 2024 07:01:06 GMT

I seems like you are not authorizing the connections with the proper role.

Are you using TACACS+ or RADIUS?

Have you checked these posts?

https://community.cisco.com/t5/network-access-control/aaa-tacacs-with-brocade-switches/m-p/2110595/highlight/true#M156065

https://www.dell.com/support/kbdoc/en-us/000224122/connectrix-brocade-tacacs-authentication-failure-rbac-permission-denied-when-executing-commands-on-the-switch

https://techdocs.broadcom.com/us/en/fibre-channel-networking/fabric-os/fabric-os-administration/9-1-x/v26752435/v26753145/v26752291/v26750992/v26753203.html

Re: Cisco ise integrate with brocade switch

thomas — Thu, 08 Aug 2024 15:39:47 GMT

You have not provided any configuration details so there is nothing to suggest or comment on.

Re: Cisco ise integrate with brocade switch

ahollifield — Thu, 08 Aug 2024 17:26:20 GMT

https://cs.co/ise-interop

Re: Cisco ise integrate with brocade switch

bruno-noc — Wed, 29 Jan 2025 13:18:21 GMT

In case you are using TACACS+, refer to this where i posted a possible solution:
ISE Configure TACACS on Brocade - Cisco Community