topic Re: Restrict SSID´S to 1 SSID in Network Access Control

Restrict SSID´S to 1 SSID

Techcreeb — Mon, 03 Mar 2025 10:07:24 GMT

Hi,I got an issue where I will like to restrict all SSID´S just to One SSID in Anyconnect in a window 10 Device. I read on here in community website, that is possible to restrict or block all other SSID and allow just one SSID to be used in the windows 10 device by editing the Anyconnect Profile using the anyconnect profile editor.Please does anyone knows how and what to edit in the anyconnect profile and can any other editor like notepad be used to edit the anyconnect profile?

Re: Restrict SSID´S to 1 SSID

JPavonM — Mon, 10 Mar 2025 08:04:22 GMT

Do you know that restricting the OS to just one SSID you are not allowing the user to telework? I this what you want and only use the laptop at the office?

Re: Restrict SSID´S to 1 SSID

Techcreeb — Mon, 10 Mar 2025 08:10:47 GMT

Hi JP,

Thanks a lot for your reply. Not sure what you meant by telework.Unfortunately, the Laptop is been used in our office as a Training Laptop and we would like to restrict it to only the Training SSID Wlan and the rest SSID`s switched off and not shown on the connection List.

Re: Restrict SSID´S to 1 SSID

JPavonM — Mon, 10 Mar 2025 11:03:35 GMT

Check here how to do it via Windows GPO:

https://www.grouppolicy.biz/2010/03/how-to-use-group-policy-to-blackwhite-list-wireless-networks-in-vista-windows-7/

Re: Restrict SSID´S to 1 SSID

Techcreeb — Mon, 10 Mar 2025 16:02:07 GMT

Thanks a lot for the advice. If I was to do that for more than one PC, then your idea is perfect. Sorry NO can´t do. I am pretty sure that can be done in Cisco anyconnect Profile,I just don´t know what to edit, or and add on the profile to limit that laptop to only 1 SSID for Wifi Connection.