https://community.cisco.com/t5/network-access-control/ise-3-1-radius-logs-delay-issue/m-p/5284648#M596079 <P>Hello,</P><P>I'm having radius logs delay issue, it take too long to see radius logs and show "Fetching records". please see below snap.</P><P>kindly suggest to fix this issue.</P><P>many thanks</P><P><a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/481106">@ISE</a> 3.1 radius logs delay issue</P> Thu, 24 Apr 2025 08:00:43 GMT sanhtethlaing 2025-04-24T08:00:43Z https://community.cisco.com/t5/network-access-control/ise-3-1-radius-logs-delay-issue/m-p/5284648#M596079 <P>Hello,</P><P>I'm having radius logs delay issue, it take too long to see radius logs and show "Fetching records". please see below snap.</P><P>kindly suggest to fix this issue.</P><P>many thanks</P><P><a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/481106">@ISE</a> 3.1 radius logs delay issue</P> Thu, 24 Apr 2025 08:00:43 GMT https://community.cisco.com/t5/network-access-control/ise-3-1-radius-logs-delay-issue/m-p/5284648#M596079 sanhtethlaing 2025-04-24T08:00:43Z https://community.cisco.com/t5/network-access-control/ise-3-1-radius-logs-delay-issue/m-p/5286375#M596153 <P>What have you tried so far?</P> <P>When did this start? Is this a new deployment?</P> <P>VM or appliance? is the MNT dedicated or part of a PAN node?</P> <P>Generally, I'd look at the following, in order of precedence</P> <OL> <LI>Look for Queue Link errors and fix those ASAP</LI> <LI>Check CPU and I/O status (either in your hypervisor or on the SNS server's CIMC)</LI> <LI>If the load on the node is very high then apply Collection Filters to lessen the logging</LI> <LI>Reboot the Primary MNT node to see if that improves it</LI> <LI>Apply latest ISE 3.1 patch to deployment</LI> <LI>Call TAC</LI> </OL> Tue, 29 Apr 2025 21:52:17 GMT https://community.cisco.com/t5/network-access-control/ise-3-1-radius-logs-delay-issue/m-p/5286375#M596153 Arne Bier 2025-04-29T21:52:17Z