https://community.cisco.com/t5/network-access-control/ipsk-manager-vm-requrirements/m-p/5330950#M598208 <P>There is no published minimum requirement, and the requirements would depend heavily on your environment. With fairly modern hypervisor hardware and no significant oversubscription of the resources I think you should be able to run it just find with 1 vCPU and 4GB of memory. That is assuming that you don't have too many simultaneous users.</P> Wed, 17 Sep 2025 13:28:11 GMT Torbjørn 2025-09-17T13:28:11Z https://community.cisco.com/t5/network-access-control/ipsk-manager-vm-requrirements/m-p/5330938#M598207 <P>Hello,</P><P>Can someone please help with the VM requirements to setup the iPSK Manager for device registration?</P> Wed, 17 Sep 2025 12:54:48 GMT https://community.cisco.com/t5/network-access-control/ipsk-manager-vm-requrirements/m-p/5330938#M598207 gurunr 2025-09-17T12:54:48Z https://community.cisco.com/t5/network-access-control/ipsk-manager-vm-requrirements/m-p/5330950#M598208 <P>There is no published minimum requirement, and the requirements would depend heavily on your environment. With fairly modern hypervisor hardware and no significant oversubscription of the resources I think you should be able to run it just find with 1 vCPU and 4GB of memory. That is assuming that you don't have too many simultaneous users.</P> Wed, 17 Sep 2025 13:28:11 GMT https://community.cisco.com/t5/network-access-control/ipsk-manager-vm-requrirements/m-p/5330950#M598208 Torbjørn 2025-09-17T13:28:11Z https://community.cisco.com/t5/network-access-control/ipsk-manager-vm-requrirements/m-p/5330960#M598209 <P>document not provided, but i used 8GB and 2CPU works as expected.</P> Wed, 17 Sep 2025 13:57:31 GMT https://community.cisco.com/t5/network-access-control/ipsk-manager-vm-requrirements/m-p/5330960#M598209 balaji.bandi 2025-09-17T13:57:31Z