https://community.cisco.com/t5/network-access-control/secure-client-and-posture-module-upgrade/m-p/5333713#M598335 <P>As part of an ISE deployment, we use 802.1x (native Windows supplicant) and Posture.</P> <P>We currently have Windows 10 workstations with the AnyConnect4.10 + Posture Module client deployed using a distribution tool such as SCCM. (not via ISE)</P> <P>We need to prepare an update to Secure Client5 and the Posture Module using the same method.</P> <P>- Can we simply install Secure Client 5.1 over Anyconnect 4.x?</P> <P>- Is it required to install as well the Compliance module with the SCCM or will it be retrieved when the Posture module connect to ISE?</P> <P>- Will the configuration be retained?</P> <P>- Do we need to add anything else in ISE in the Client Provisioning menu? (even though we are not deploying SecureClient via ISE)</P> <P>I don't fully understand this menu, especially when we don't use the Provisioning Portal feature.</P> <P>What would be a good upgrade plan for this ?&nbsp;</P> <P>Thank you for your valuable comments.</P> <P>&nbsp;</P> Fri, 26 Sep 2025 10:20:09 GMT REJR77 2025-09-26T10:20:09Z https://community.cisco.com/t5/network-access-control/secure-client-and-posture-module-upgrade/m-p/5333713#M598335 <P>As part of an ISE deployment, we use 802.1x (native Windows supplicant) and Posture.</P> <P>We currently have Windows 10 workstations with the AnyConnect4.10 + Posture Module client deployed using a distribution tool such as SCCM. (not via ISE)</P> <P>We need to prepare an update to Secure Client5 and the Posture Module using the same method.</P> <P>- Can we simply install Secure Client 5.1 over Anyconnect 4.x?</P> <P>- Is it required to install as well the Compliance module with the SCCM or will it be retrieved when the Posture module connect to ISE?</P> <P>- Will the configuration be retained?</P> <P>- Do we need to add anything else in ISE in the Client Provisioning menu? (even though we are not deploying SecureClient via ISE)</P> <P>I don't fully understand this menu, especially when we don't use the Provisioning Portal feature.</P> <P>What would be a good upgrade plan for this ?&nbsp;</P> <P>Thank you for your valuable comments.</P> <P>&nbsp;</P> Fri, 26 Sep 2025 10:20:09 GMT https://community.cisco.com/t5/network-access-control/secure-client-and-posture-module-upgrade/m-p/5333713#M598335 REJR77 2025-09-26T10:20:09Z