topic Re: Can not authenticate while trying to bring up the web interf in Network Access Control

Can not authenticate while trying to bring up the web interface to a router

admin_2 — Fri, 21 Feb 2020 18:01:45 GMT

I try to use the web interface to look at the router but it will not authenicate the username and passowrd. I am running aaa authentication with a radius server but I am using the default enable setting on the http server (ip http authentication enable) which should let me just use the enable password but it will not. Any suggestions?

Re: Can not authenticate while trying to bring up the web interf

Mon, 08 Jul 2002 16:54:59 GMT

I was not able to reproduce this problem,

but I'm not sure what your config is

exactly and what version of code you are at.

Note that cisco does not really recommend

enabling this sort of access; it's prone

to potential security issues. You should

limit your access to a router with SSH,

and if that is not possible then with

telnet.