https://community.cisco.com/t5/network-access-control/user-authentication-through-pix-535/m-p/50620#M6576 <P>Just purchased Pix Firewall, It is in our development Lan for the moment until configuration is completed. My question being new to the Pix world is I would like to have my users Authenticate with user name and password for access to the Internet. My current method is Novell Bordermanager 3.6 which we are Dropping for the Pix. Currently Running Netware 5.1 and NT 4.0 Domain Servers.</P><P>Thank You In Advance</P><P>Any Suggestions would be appreciated.</P> Fri, 21 Feb 2020 18:00:36 GMT zczaja 2020-02-21T18:00:36Z https://community.cisco.com/t5/network-access-control/user-authentication-through-pix-535/m-p/50620#M6576 <P>Just purchased Pix Firewall, It is in our development Lan for the moment until configuration is completed. My question being new to the Pix world is I would like to have my users Authenticate with user name and password for access to the Internet. My current method is Novell Bordermanager 3.6 which we are Dropping for the Pix. Currently Running Netware 5.1 and NT 4.0 Domain Servers.</P><P>Thank You In Advance</P><P>Any Suggestions would be appreciated.</P> Fri, 21 Feb 2020 18:00:36 GMT https://community.cisco.com/t5/network-access-control/user-authentication-through-pix-535/m-p/50620#M6576 zczaja 2020-02-21T18:00:36Z https://community.cisco.com/t5/network-access-control/user-authentication-through-pix-535/m-p/50621#M6577 <HTML><HEAD></HEAD><BODY><P>Following URL will assist you</P><P><A class="jive-link-custom" href="http://www.cisco.com/warp/public/110/authtopix.shtml" target="_blank">http://www.cisco.com/warp/public/110/authtopix.shtml</A></P><P></P><P>HTH</P><P>R/Yusuf</P></BODY></HTML> Wed, 19 Jun 2002 10:11:44 GMT https://community.cisco.com/t5/network-access-control/user-authentication-through-pix-535/m-p/50621#M6577 yusuff 2002-06-19T10:11:44Z