topic Re: authentication problem in Network Access Control

authentication problem

sumeerbhat — Fri, 21 Feb 2020 17:56:32 GMT

I am using

aaa authentication ppp default radius if-needed command in AS5814 access server.

but I am getting authentication through pre-dial screen on dialup and for post-dial screen , I am getting error as authorization failed.

please comment.

pcadmn — Thu, 15 Mar 2001 21:34:06 GMT

Could you post your configs? This might help people on the forum to find the problem. Leave out any info that is confidential.

sumeerbhat — Fri, 16 Mar 2001 08:45:36 GMT

Hi,

This is the aaa config :aaa new-model

aaa authentication banner ^C WELCOME TO NIB HYDERABAD ^C

aaa authentication fail-message ^CCCCCAccess Denied...Please check your Login na

me and Password.^C

aaa authentication password-prompt "Password :"

aaa authentication username-prompt "Username :"

aaa authentication login default local radius

aaa authentication login vty-line line

aaa authentication login console none

aaa authentication ppp default if-needed radius

aaa authorization network default if-authenticated radius

aaa accounting suppress null-username

aaa accounting network default start-stop radius