RADIUS-3-NOSERVERS: No radius hosts configured or no valid server present in the server group

LZPD_RauLa — Mon, 11 Mar 2019 05:06:16 GMT

Hi,

I currently have an C2960 switch with IOS 15.0(2) SE4. To log on the CLI of the switch authentication against a RADIUS server takes place. Accounting is not wanted. The config of the switch is as follows:

aaa new-model

aaa group server radius RADIUSGROUP

server xxx.xxx.xxx.1 auth-port 1812 acct-port 0

server xxx.xxx.xxx.2 auth-port 1812 acct-port 0

aaa authentication login default group RADIUSGROUP local

aaa authentication dot1x default group RADIUSGROUP

aaaauthorization network default group RADIUSGROUP

radius server host xxx.xxx.xxx.1 auth-port 1812 acct-port 0 key 7 [encrypted password]

radius server host xxx.xxx.xxx.2 auth-port 1812 acct-port 0 key 7 [encrypted password]

It works fine, the authentication and the login are successful, but every login generates a message in the logging of the switch:

RADIUS-3-NOSERVERS: No radius hosts configured or no valid server present in the server group

What is going wrong???

Any help would be appreciated.

topic RADIUS-3-NOSERVERS: No radius hosts configured or no valid server present in the server group in Network Access Control

RADIUS-3-NOSERVERS: No radius hosts configured or no valid server present in the server group