topic Re: Websense Authentication in Network Access Control https://community.cisco.com/t5/network-access-control/websense-authentication/m-p/32596#M7299 <HTML><HEAD></HEAD><BODY><P>The PIX doesn't support this, it only sends the URL off to WebSense and expects a yes/no type response.</P></BODY></HTML> Fri, 20 Sep 2002 04:40:07 GMT gfullage 2002-09-20T04:40:07Z Websense Authentication https://community.cisco.com/t5/network-access-control/websense-authentication/m-p/32595#M7295 <P>Can you use the Websense manual authentication feature so that the user is prompted for username and password, when an http request is generated? Currently, AAA - ACS 3.0 is used for authentication outbound and I would like to get away from all of the excludes for trusted web sites ( a site that a user can access without being approved for Internet access). Any thoughts?</P><P></P><P>Thanks,</P><P></P><P>Martin</P> Fri, 21 Feb 2020 18:03:51 GMT https://community.cisco.com/t5/network-access-control/websense-authentication/m-p/32595#M7295 mkowalewski 2020-02-21T18:03:51Z Re: Websense Authentication https://community.cisco.com/t5/network-access-control/websense-authentication/m-p/32596#M7299 <HTML><HEAD></HEAD><BODY><P>The PIX doesn't support this, it only sends the URL off to WebSense and expects a yes/no type response.</P></BODY></HTML> Fri, 20 Sep 2002 04:40:07 GMT https://community.cisco.com/t5/network-access-control/websense-authentication/m-p/32596#M7299 gfullage 2002-09-20T04:40:07Z