topic ACS 5.5 create HOSTS by CLI in Network Access Control

ACS 5.5 create HOSTS by CLI

massimoonorati — Mon, 11 Mar 2019 05:00:47 GMT

Hello Expert,

I have to create a new HOST from Internal Identity Stores Menu. From the User Interface I can do it but I need to know if I can do it from Command Line to developing the automation in script file....

Have you any suggestion ??

Thanks in advance

Max

Hi,you can't add data from

alek.gozali — Tue, 21 Oct 2014 01:46:52 GMT

Hi,

you can't add data from CLI,

but you can import data from CLI and GUI

in the GUI, please refer to internal identity stores -> Host

you should find import button , it will give you a template (.csv ) , after you fill the data.

upload it with that import wizard.

Hello Max-The CLI is very

nspasov — Tue, 21 Oct 2014 07:03:20 GMT

Hello Max-

The CLI is very limited to what you can you can configure when it comes to ACS. Once you are in the CLI you can use "acs-config" to access the configuration menu for the ACS application. However, once you are in you will notice that your options are limited.

Your only other option would be to get root access but that is not recommended nor supported. So a better question would be "Why do you need to make any changes via CLI?"

As suggested by Alek, mass export/import would be an easy option.

Thank you for rating helpful posts!