Authentication problem with Load Balancers and ACS 4.2 (1) build 15 patch 4

stuart hutchinson — Mon, 11 Mar 2019 04:58:59 GMT

Hi,

I have an authentication problem with load balancers and ACS 4.2 (1) build 15 patch 4. The load balancers don't register as a fail or pass on the ACS.

I've made an account called aceadmin, and it has unrestricted level 15 commands and it's own shell custom attributes of shell:Admin*Admin default-domain . I've also tried replacing this with shell:Cnt1=admin default-domain

The user group that aceadmin is in has shell customer attributes of cisco-av-pair=shell:roles="network-admin" and shell:Admin*Admin default-domain

Is there anything else we can try regarding the set up on the ACS?

Thanks.

RADIUS VSA/cisco-av-pair or

Peter Koltl — Sun, 31 Aug 2014 21:12:37 GMT

RADIUS VSA/cisco-av-pair or TACACS+ AV-pair?

Peter, the load balancer

stuart hutchinson — Mon, 01 Sep 2014 16:41:03 GMT

Peter, the load balancer devices are in a general TACACS+ group with TACACS+ router and switches.

topic Authentication problem with Load Balancers and ACS 4.2 (1) build 15 patch 4 in Network Access Control

Authentication problem with Load Balancers and ACS 4.2 (1) build 15 patch 4

RADIUS VSA/cisco-av-pair or

Peter, the load balancer