topic An internal error has been in Network Access Control

5417 Dynamic Authorization failed

lhviet001 — Mon, 11 Mar 2019 05:34:14 GMT

Hi guys,

Does anyone meet this Radius Error in Cisco ISE 1.2 and the switch 2960 12.2(55)SE7 ?

When i reauthentication the guest profile to the other profile using Radius CoA on the Self-Service Guest Workflow.

The error is :

Event	5417 Dynamic Authorization failed
Failure Reason	11103 RADIUS-Client encountered error during processing flow
Resolution	Do the following: 1) Verify shared secret matches on the ISE Server and corresponding AAA Client, External AAA Server or External RADIUS Token Server. 2) Check the AAA Client or External Server for hardware problems. 3) Check the network devices that connect the AAA peer to ISE for hardware problems. 4) Check whether the network device or AAA Client has any known RADIUS compatibility issues.
Root cause	RADIUS-Client encountered an error during processing flow

I checked all the resolution steps but the error sitll exsit.

I would greatly appreciate any help you can give me in working this problem

An internal error has been

mohanak — Mon, 23 Mar 2015 11:11:37 GMT

An internal error has been detected during the processing of an incoming RADIUS packet. Make sure that the client device is compatible with AD Agent, has been configured properly, and is functioning properly. Make sure that the same RADIUS shared secret has been properly configured, both in the client device and in AD Agent.

http://www.cisco.com/c/en/us/td/docs/security/ibf/setup_guide/ad_agent_setup_guide/ibf10_log_msgs.html

Last I checked the

Justin bollinger — Mon, 23 Mar 2015 20:17:52 GMT

Last I checked the recommended version was 12.2(55)SE9 You may want to upgrade to SE9.

Did you manage to solve this

islow1303 — Fri, 26 Aug 2016 10:03:13 GMT

Did you manage to solve this issue?