ACS 5.5 routing between interface

Lorenzo46 — Fri, 21 Feb 2020 18:29:49 GMT

Hi,

My question is simple:

I have an ACS with 3 interfaces: Gi0/0, Gi0/1 and Gi0/2. I've configured the 3 interfaces with 3 different IP Addresses. I've made this because I have 3 networks: Management (10.10.0.0/24), Network 1 (10.10.1.0/24) and Network 2 (10.10.2.0/24). The ACS has configured with ip default gateway on Management Network.

TheACS is the Radius Server for the 3 separated networks.

I'd like to know if the ACS has routing capability or it is able to guarantee the isolation between the network.

For my scope, repeat, I need the isolation between the networks.

Thank you for the support!

Best Regards

Lorenzo

Hi,You need a firewall like

johnd2310 — Thu, 23 Apr 2015 08:07:18 GMT

Hi,

You need a firewall like the ASA to isolate networks. The ACS is used for authentication and does not do network segregation.

Thanks

John

topic Hi,You need a firewall like in Network Access Control

ACS 5.5 routing between interface

Hi,You need a firewall like