topic Re: Cisco ACS deployment in Network Access Control

Cisco ACS deployment

teymur azimov — Fri, 21 Feb 2020 18:28:59 GMT

Hi dears,

I have 2 physically Cisco ACS model. I want to deploy one of them is Primary and other one is secondary.

How i configurate this deployment??

must I be assign each ACS different ip adddress?? what about the license??

THANKS.

Cisco ACS deployment

teymur azimov — Wed, 19 Feb 2014 06:59:21 GMT

I have only one PAK. I install the Primary ACS and register the PAK and get license. Then i install this license to the Primary ACS.All of them is good for Primary ACS. Now i want to start configurate the Secondary one. BUT i confuse the license issue.

Do i need a license for secondary ACS?

Thanks.

Re: Cisco ACS deployment

Marvin Rhoads — Sun, 23 Feb 2014 16:31:12 GMT

Yes, the secondary server needs its own license. The reference here tells us:

A secondary ACS server receives all the system configurations from the primary server, except that you need to configure the following on each secondary server:

•License—Install a unique base license for each of the ACS secondary servers in the deployment.

Re: Cisco ACS deployment

Jatin Katyal — Wed, 05 Mar 2014 03:21:30 GMT

It seems you're deploying ACS 5.x. Once you have license installed on the seconday ACS server. Here are the steps to register the secondary box to the primary.

Register a secondary node to the primary instance.

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-4/user/guide/acsuserguide/admin_operations.html#wp1056068

Let us know if you need any further assistance on this.

~BR
Jatin Katyal

**Do rate helpful posts**