debug radius local-server

SergeyStep — Tue, 26 Mar 2019 00:32:49 GMT

Hi all!

Please help me/

I'm use c181x-adventerprisek9-mz.151-4.M9.bin.

I'm set AP with local radius server. In official documentation have "debug radius local-server", in ios command reference this command also exits.

But in my router not have this command.

This is bug?

Are you running this command

Scott Reu — Mon, 09 Mar 2015 15:45:24 GMT

Are you running this command in Privileged EXEC mode, or global config mode? This is a Privileged EXEC command, so when you enter it, your prompt should look like this:

RouterName# debug radius local-server

And not like this:

RouterName(config)# debug radius local-server

Please also note that since this is a debug command, it will not appear in your device's running-config, and it may not continue running if you reload or power-cycle your device. It will just show debug messages at the console line and/or log them to the logging buffer and/or to an Syslog server, if configured.

topic debug radius local-server in Network Access Control

debug radius local-server

Are you running this command