topic ACS SE in Network Access Control

ACS SE

Danny Feagin — Mon, 11 Mar 2019 05:23:26 GMT

The default credentials given in the password recovery procedure for Cisco ACS SE do not work. The credentials given are Administrator as login and setup as password, but they do not work. Any suggestions?

Are you talking about the GUI

nspasov — Thu, 29 Jan 2015 03:21:34 GMT

Are you talking about the GUI or the CLI?

If you cannot log in to the

mohanak — Thu, 29 Jan 2015 11:06:32 GMT

If you cannot log in to the system because you have lost the account name or password for the ACS SE administrator account, perform this procedure. In this procedure you use the ACS SE Recovery CD-ROM to access the system from the serial console and reset the administrator login credentials.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/solution_engine/admap.html#wp1038722

I am using the GUI. Should I

Danny Feagin — Thu, 29 Jan 2015 12:06:21 GMT

I am using the GUI. Should I be using the CLI?

What version of ACS are you

nspasov — Fri, 30 Jan 2015 07:11:46 GMT

What version of ACS are you using/trying to setup?