topic Thanks for updating /closing in Network Access Control

ISE Guest Port Direction not working

SiJian Bao — Mon, 11 Mar 2019 05:22:44 GMT

Hi Guys,

Got a problem here with ISE guest authentication.

My configuration in the WLC is as bellows:

And the configuration in my ISE is as bellows:

After my device connects to the SSID, I cannot be redirected to the guest portal, no redirection URL showed up in my browser, while the URL is pushed to the WLC client as bellows:

DNS A record has been added before and I can open the FQDN.

Can anyone help me about this? Thanks!

Best Regards,

Savi

Are you able to ping /

Jatin Katyal — Sat, 24 Jan 2015 04:25:06 GMT

Are you able to ping / nslookup to ISE.wuscnad.com from the test client?

Also, please provide a screen shot of the set of ACL's CWA-Guest from the WLC?

Here is a document you can go through to configure wireless CWA

http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html

Regards,

Jatin

Hi Jatin, The problem was

SiJian Bao — Sat, 24 Jan 2015 15:16:24 GMT

Hi Jatin,

The problem was resolved just after reloading the WLC, so it seems that there might be something wrong with pushing the URL from the WLC to the client. Thanks a lot for your reply anyway.

Best Regards,

Savi

Thanks for updating /closing

Jatin Katyal — Sat, 24 Jan 2015 15:58:54 GMT

Thanks for updating /closing the thread.

Appreciate it.

Jatin