topic Have you checked the "Command in Network Access Control

purpose of aaa accounting connection

shoaib sheikh — Mon, 11 Mar 2019 05:18:53 GMT

Hi All,

I want to understand the purpose of following command:

hostname(config)#aaa accounting {connection} {default} {start‐stop} {group‐tacacs+} [local‐case …]

Thanks in advance...

Have you checked the "Command

nspasov — Wed, 31 Dec 2014 19:50:19 GMT

Have you checked the "Command Lookup Tool"

https://tools.cisco.com/Support/CLILookup/cltSearchAction.do

It is a pretty handy tool to research just about any Cisco commands out there for IOS, NX-OS and XE. Check it out and let us know if you still have questions about the "aaa accounting..." syntax

Thank you for rating helpful posts!

Hi Neno,Never knew about this

shoaib sheikh — Thu, 01 Jan 2015 04:58:27 GMT

Hi Neno,

Never knew about this helpful link. Thanks for posting the link.

I got below information:

Connection- Keeps information about all outbound connections made from the router,
such as Telnet and rlogin

start-stop- Sends a start accounting notice at the beginning of a process and a stop
accounting notice at the end of a process. The user's process begins regardless.

local-case - Uses case-sensitive local username authentication