topic Refer the link for similar in Network Access Control

Alarms: Misconfigured Network Device Detected

gurmjaspreet — Mon, 11 Mar 2019 05:18:32 GMT

Hi,

We have 2 ISE (HA) and 2 WLC (primay Secondary) configured in our network.

In ISE i am getting this error 12929 NAS sends RADIUS accounting update messages too frequently.

Please help!!!! 🙂

Regards

Jass

Refer the link for similar

mohanak — Tue, 30 Dec 2014 12:30:18 GMT

Refer the link for similar issue: https://supportforums.cisco.com/discussion/12194891/ise-12-error-12929-nas-sends-radius-accounting-update-messages-too-frequently

Verify NAS configuration.

Abhishek Abhishek — Fri, 13 Mar 2015 12:42:35 GMT

Verify NAS configuration. Verify known NAS issues.

Frequent alarms on 12929 NAS

Saurav Lodh — Mon, 18 May 2015 19:38:01 GMT

Frequent alarms on 12929 NAS sends RADIUS accounting update messages too frequently

The message on RADIUS accounting updates occur too frequently is related to the following:

Table A-23 RADIUS Settings @

http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_ui_reference_administration.html#wp1293445

Accounting Suppression Interval : Enter the time interval in seconds for which the reporting of accounting requests to be suppressed.

When NAS sends accounting update regarding specific endpoint more often than "Accounting Suppression Interval" then AAA Runtime passes to M&T only one record during this interval. When accounting update comes too often from some NAS then AAA Runtime sends an alarm to M&T.

(No subject)

Venkatesh Attuluri — Thu, 21 May 2015 07:47:09 GMT

Just remove the WLCs from

alex.fana1 — Mon, 19 Sep 2016 12:27:08 GMT

Just remove the WLCs from your ISE and add them back in. This worked for me.

Cheers