topic Hi Neno, thank for your reply in Network Access Control

DACL Download Failed

Fatoumata Sow — Mon, 11 Mar 2019 05:18:22 GMT

Hi,

We need your help.

I get this error when I try to configure Authorization policy from Cisco ISE:

5419 DACL Download Failed
Failure Reason	11025 The Access-Request for the requested dACL is missing a cisco-av-pair attribute with the value aaa:event=acl-download. The request is rejected

The NAD is WS-C3560G-24PS-S and IOS version is : C3560 Software (C3560-IPBASEK9-M)

Do you think that is a compatibily issue ?

Regards,

nspasov — Mon, 29 Dec 2014 16:53:56 GMT

The 3560G is fully compatible. Usually this is caused by a typo in the dACL. Double check that and perhaps post the syntax here.

Thank you for rating helpful posts!

Fatoumata Sow — Wed, 31 Dec 2014 09:29:55 GMT

Hi Neno,

thank for your reply. As you suggested, after checking I had forgotten some commands 🙂

Now it works.

nspasov — Wed, 31 Dec 2014 17:07:40 GMT

Glad to hear that the issue was resolved and thank you for taking the time to come back and confirm the solution (+5 from me).

If your issue is resolved, please mark the thread as "answered" 🙂