topic Re: ACS 1113 hyperterminal problems in Network Access Control https://community.cisco.com/t5/network-access-control/acs-1113-hyperterminal-problems/m-p/970169#M7918 <HTML><HEAD></HEAD><BODY><P>change the console cables. also give the proper console parameter for the console session with the box</P></BODY></HTML> Mon, 07 Apr 2008 17:54:17 GMT smalkeric 2008-04-07T17:54:17Z ACS 1113 hyperterminal problems https://community.cisco.com/t5/network-access-control/acs-1113-hyperterminal-problems/m-p/970168#M7916 <P>folks</P><P></P><P>i have a ACS 1113 appliance which i'm trying to hyperterminal to but with no joy</P><P></P><P>i'm using</P><P></P><P>115200</P><P>8</P><P>N</P><P>1</P><P>No flow control</P><P></P><P>but i can't get anything from the console</P><P></P><P>i have tried the same on my backup box but still the same</P><P></P><P>does anyone know the actual settings</P><P></P><P>thanks to anyone taking the time to reply</P> Fri, 21 Feb 2020 18:20:48 GMT https://community.cisco.com/t5/network-access-control/acs-1113-hyperterminal-problems/m-p/970168#M7916 mulhollandm 2020-02-21T18:20:48Z Re: ACS 1113 hyperterminal problems https://community.cisco.com/t5/network-access-control/acs-1113-hyperterminal-problems/m-p/970169#M7918 <HTML><HEAD></HEAD><BODY><P>change the console cables. also give the proper console parameter for the console session with the box</P></BODY></HTML> Mon, 07 Apr 2008 17:54:17 GMT https://community.cisco.com/t5/network-access-control/acs-1113-hyperterminal-problems/m-p/970169#M7918 smalkeric 2008-04-07T17:54:17Z Re: ACS 1113 hyperterminal problems https://community.cisco.com/t5/network-access-control/acs-1113-hyperterminal-problems/m-p/970170#M7921 <HTML><HEAD></HEAD><BODY><P>i resolved the the problem along the lines of your suggestion</P><P></P><P>i use both juniper and cisco kit but i had got the db9 plugs mixed up</P><P></P><P>when i made sure the console cable had a db9 from the acs1113 box it all worked</P><P></P><P>must have been an issue with pin outs</P><P></P><P>many thanks for taking the time to reply</P></BODY></HTML> Mon, 07 Apr 2008 18:44:14 GMT https://community.cisco.com/t5/network-access-control/acs-1113-hyperterminal-problems/m-p/970170#M7921 mulhollandm 2008-04-07T18:44:14Z