topic Implementing AAA on 5200 run DDR in Network Access Control

Implementing AAA on 5200 run DDR

chglover — Fri, 21 Feb 2020 18:03:59 GMT

I would like to move to AAA for better administration. We currently have 100 DDR dialer interfaces using chap. Can you enable AAA an slowly migrate each dialer interface to AAA or is it all or nothing. If it is all or nothing can you change the dialer interfaces on the 5200 without making changes on the routers dialing into it?

Thanks,

Chuck Glover

cglover@lbss.com

Re: Implementing AAA on 5200 run DDR

yusuff — Sat, 28 Sep 2002 07:47:32 GMT

You can migrate to AAA slowly on a per dialer interface basis. You need to create a named method list for AAA and then apply the said named method list to a particualr dialer interface, this way, other dialer interfaces will not be using AAA.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/secur_c/scprt1/scauthen.htm#xtocid2972112

HTH

R/Yusuf