topic Re: single SSID and ACS in Network Access Control

single SSID and ACS

balsheikh — Fri, 21 Feb 2020 18:18:28 GMT

Hi,

I would like your help in the following scenario, we currently have a setup of CAS CAM, LDAP, WISM and ACS,

The main point I'm focusing on is the ACS and WISM.

Users are to obtain wireless access using a single SSID, and upon validation of credentials, they should gain access to one of 3 vlans, guest, data and voice, the use of separate SSID per vlan was highly discouraged by customer.

Would appreciate your advice on the best feasible way to implement this.

Regards,

Re: single SSID and ACS

Jagdeep Gambhir — Tue, 03 Jul 2007 13:14:45 GMT

Hi,

You can have single SSID in your setup. You need to set up feature called Dynamic VLAN Assignment.

Check out this link,

http://www.cisco.com/en/US/partner/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml

Regards,

~JG

Please rate if that helps !

Re: single SSID and ACS

Jagdeep Gambhir — Tue, 03 Jul 2007 13:43:04 GMT

Also check out AP Group VLANs feature,

http://www.cisco.com/en/US/customer/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

Regards,