topic Re: ACS in Network Access Control https://community.cisco.com/t5/network-access-control/acs/m-p/672446#M8109 <HTML><HEAD></HEAD><BODY><P>Hello Aksher,</P><P></P><P>are you trying telnet to Access Control Server (ACS)? If so, i really dont think you can !!!! You can access ACS through GUI on http or https only.... </P><P></P><P>Raj</P></BODY></HTML> Fri, 08 Dec 2006 00:20:04 GMT sachinraja 2006-12-08T00:20:04Z ACS https://community.cisco.com/t5/network-access-control/acs/m-p/672445#M8107 <P>Need inputs on to do telnet to the ACS from a L3 6513 switch? </P><P></P><P>Am trying to telnet from 6513 from where the traffic passes through a FWSM before hitting the ACS. </P><P></P><P>Am able to see hitcount on the FWSM too. </P><P></P><P></P> Fri, 21 Feb 2020 18:17:20 GMT https://community.cisco.com/t5/network-access-control/acs/m-p/672445#M8107 aksher 2020-02-21T18:17:20Z Re: ACS https://community.cisco.com/t5/network-access-control/acs/m-p/672446#M8109 <HTML><HEAD></HEAD><BODY><P>Hello Aksher,</P><P></P><P>are you trying telnet to Access Control Server (ACS)? If so, i really dont think you can !!!! You can access ACS through GUI on http or https only.... </P><P></P><P>Raj</P></BODY></HTML> Fri, 08 Dec 2006 00:20:04 GMT https://community.cisco.com/t5/network-access-control/acs/m-p/672446#M8109 sachinraja 2006-12-08T00:20:04Z Re: ACS https://community.cisco.com/t5/network-access-control/acs/m-p/672447#M8111 <HTML><HEAD></HEAD><BODY><P>sachinraja is right pointing it out. You can't telnet to ACS regardless if it's running on appliance or server. Only possible if you have separate telnet services running on the same server where your ACS resides.</P><P></P><P>Otherwise, use web GUI.</P><P></P><P>HTH</P><P>AK</P></BODY></HTML> Fri, 08 Dec 2006 00:25:58 GMT https://community.cisco.com/t5/network-access-control/acs/m-p/672447#M8111 a.kiprawih 2006-12-08T00:25:58Z