topic Re: Cisco ISE Dashboard empty in Network Access Control

Cisco ISE Dashboard empty

adecisco — Mon, 11 Mar 2019 04:39:35 GMT

Dear all,

This empty dashboard has occurred not within period of two month in which admin node portal just went empty.

TAC was called the first time and restart the services everything work fine. But I am curious knowing under what circumstances can this happen when without notice Primary Admin node Dashboard going blank.

Any useful help would be appreciated.

Regards,

Adeola

this may occur due to issue

Venkatesh Attuluri — Wed, 23 Apr 2014 03:39:13 GMT

this may occur due to issue with Adobe Flash Player

Cisco ISE Monitoring Dashlets

Saurav Lodh — Thu, 24 Apr 2014 09:21:01 GMT

Cisco ISE Monitoring Dashlets Not Visible with Internet Explorer 8

Symptoms or Issue	Administrator sees one or more “There is a problem with this website's security certificate.” messages after clicking the dashlets in the Cisco ISE monitoring portal.
Conditions	This issue is specific to Internet Explorer 8. (This issue has not been observed when using Mozilla Firefox.)
Possible Causes	The security certificate for the Internet Explorer 8 browser connection is invalid or expired.
Resolution	Use Internet Explorer 8 to reimport a valid security certificate to view the dashlets appropriately.

HI salodh ,Can you provide a

adecisco — Mon, 28 Apr 2014 06:34:52 GMT

HI salodh ,

Can you provide a ref for your table?

Never mind I got it here..

http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/troubleshooting_guide/ise_tsg.html

Thanks,

Hello,you could take a look

eric.lessard — Thu, 22 May 2014 06:41:06 GMT

Hello,

you could take a look at:

ISE 1.2 Dashboard Statics do not update

CSCul94611

Description

Symptom:
Issue with the Live dashboard in ISE 1.1.4 not displaying information and only showing "No Data Available".

Fixed my issue using the workaround

Hope it helps

Re: Cisco ISE Dashboard empty

Jeffrey Cirisan — Tue, 16 Apr 2019 13:39:32 GMT

I have had this happen a few times. What I have found is that when the dashlets on the Primary admin node are empty they show up on the Secondary admin node populated. Restarting ise app on the Secondary has always made the dashlets repopulate on the primary for me.