NAC agent dont popup automaticaly at the first connexion

nicanor00 — Mon, 11 Mar 2019 04:38:39 GMT

I have ISE 1.2 and catalyst 2960

But the NAC agent is not poping up automatically at the first conection on the network

All log and authentication session look OK but the NAC agent dont popup automatycaly
At the first conexion on the network I must right click on NAC properties and enter manualy the IP address of the ISE on the discovery host field before get the NAC popup

Then for the second and the other next conexion on the network, the NAC agent popup automaticaly, even if I remove the IP address of the ISE on the discovery host field

Why do I need to enter the IP of the ISE manualy before get the first NAC agent popup ?

I need the NAC agent to popup automatycaly at the first conexion of the PC on the network (switch) without entered manually the IP address of the ISE on the discovery host field

Please help

checkPolicy > Policy Elements

Venkatesh Attuluri — Fri, 18 Apr 2014 15:35:49 GMT

check

Policy > Policy Elements > Results > Client Provisioning > Resources

edit the profile and there should be a discovery host box.

topic NAC agent dont popup automaticaly at the first connexion in Network Access Control

NAC agent dont popup automaticaly at the first connexion

checkPolicy > Policy Elements