NAC agent installation error 1935

Anas Hijjawi — Mon, 11 Mar 2019 04:26:56 GMT

We are getting the below error while installing NAC agent:

error 1935. an error occurred during the installation of the assembly component

Did anyone faced the same issue before.

Thanks for assistance

NAC agent installation error 1935

Saurav Lodh — Wed, 05 Mar 2014 15:49:04 GMT

This is not a cisco error but microsoft, please see this

http://support.microsoft.com/kb/970652

NAC agent installation error 1935

Naveen Kumar — Thu, 06 Mar 2014 11:27:06 GMT

Ref:

http://support.microsoft.com/kb/902330

To resolve this problem, use the following methods in the order that they are presented.

Method 1: Remove the program

To resolve this problem, follow these steps:

Remove the program from the computer by using an anti-spyware program. If you do not have an anti-spyware program, you can download the Microsoft Windows AntiSpyware program. To download the AntiSpyware program, visit the following Microsoft Web site:
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
Click Start, click Run, type appwiz.cpl, and then click OK.
Under Currently installed programs and updates, see whether the following programs are listed:
- WinTools
- WinEasy
- WebSearch
- Easy Installer
- System Mechanic
- HP Component Manager
If one or more of these programs are listed, click to select the program, and then click Change/Remove. Click Yes if you are prompted to confirm the removal. Follow the instructions on the screen to remove the program.
Delete the temporary files on the computer. To do this, follow these steps:
1. Click Start, click Run, type cmd, and then click OK.
2. At the command prompt, type cd\windows\temp, and then press ENTER.
3. At the command prompt, type del *.tmp, and then press ENTER.
Empty the Recycle Bin. To do this, follow these steps:
1. On the desktop, double-click Recycle Bin.
2. On the File menu, click Empty Recycle Bin.
Reinstall Works, Student, or Encarta.

Method 2: Set Ad Aware to manual mode and quit Ad-Watch

If following the steps in the "Method 1: Remove the program" section does not resolve the problem, and if Ad Aware is installed on the computer, set Ad Aware to manual mode, and then quit Ad-Watch. To do this, follow these steps:

Set Ad-Watch to manual mode.

Note You must perform this step.
Quit Ad-Watch.
Install Works, Student, or Encarta.
Restart Ad-Watch.
Accept the changes that Ad-Watch detects as they appear on the screen.

topic NAC agent installation error 1935 in Network Access Control

NAC agent installation error 1935

NAC agent installation error 1935

NAC agent installation error 1935

Method 1: Remove the program

Method 2: Set Ad Aware to manual mode and quit Ad-Watch