topic Re: How to check Cisco ISE version from Web UI in Network Access Control

How to check Cisco ISE version from Web UI

Saurabh Kishore — Mon, 11 Mar 2019 04:25:47 GMT

Hi All,

For some reason I have lost access to the CLI for ISE and only have access to the WebUI. I wanted to check what version is currently running on the nodes.

Tried looking everywhere but could not find it

Can someone point me in the right direction?

How to check Cisco ISE version from Web UI

kaaftab — Thu, 20 Feb 2014 09:26:01 GMT

From the Top left side

there is a link for ise-1 click that link and you can see that ISE version

How to check Cisco ISE version from Web UI

Saurabh Kishore — Thu, 20 Feb 2014 09:30:20 GMT

Cannot find any link on the top left.. On the right there is one which displays the node information. and that does not show the version:

How to check Cisco ISE version from Web UI

Saurabh Kishore — Thu, 20 Feb 2014 09:33:26 GMT

Never Mind, AFter some exhaustive effort, I got it.. There is a Help tab down the left of the page, and after clicking on it you can go to about ISE which shows the version...

Re: How to check Cisco ISE version from Web UI

kaaftab — Thu, 20 Feb 2014 09:46:27 GMT

In cisco ISE 1.2

Re: How to check Cisco ISE version from Web UI

SamuelFullman6827 — Sat, 09 Feb 2019 13:22:36 GMT

The upper left click didn't work for me. BUT, I was able to view source and search for the word "version", got this:

Also there's a window-level object you'll see so you could type in console:

_iseGlobalInfo.softwareVersion (for me 2.4.0.357)

Re: How to check Cisco ISE version from Web UI

hslai — Sun, 17 Feb 2019 17:07:15 GMT

The menu locations changed over the time across different ISE releases.

(view in My Videos)

Re: How to check Cisco ISE version from Web UI

cmcelhin — Wed, 16 Jul 2025 17:22:04 GMT

On top right Icon you and click and select about ISE and server. There you can get the release and patch you are using.