topic Re: ISE authenitacation in Network Access Control

ISE authenitacation

danimax01 — Mon, 11 Mar 2019 04:21:49 GMT

Hello,

I have a problem with authentication on ISE. We don't want a scenario whereby a credential can be used more than once to authenticate with ISE.

For example.

User A authenticate with ISE with usename : danimax.

Username "danimax credential" should not be used by any other person while user A is still Online.

We want 1 credential for 1 person.

ISE authenitacation

Saurav Lodh — Thu, 06 Feb 2014 10:03:38 GMT

Please refer to below post

https://supportforums.cisco.com/thread/2178977

ISE authenitacation

danimax01 — Thu, 06 Feb 2014 10:15:17 GMT

Thank you for your response.

i have checked the thread but the thread is talking about guest access.

I want to limit our employee to one device per credential so that user A will authenticate with its credential for like 10 different people.

1 credential = only 1 authentication. that is what we want to achieve.

Re: ISE authenitacation

kaaftab — Fri, 07 Feb 2014 10:10:05 GMT

You can limit the number of divices per user using the option shown below(see attachment)

Note: If you find the answer helpful do remember to rate it

Re: ISE authenitacation

Ahmad Murad — Fri, 07 Feb 2014 13:25:26 GMT

ISE currently does not have this feature if you need to limit the number of sessions per user.

I mean if user "x" uses his smart device and phone and laptop, then the ISE does not have the feature to limit the access without device registration.

You can limit the number of sessions in the WLC per username, and it works per username.

For the Wired access, there is no way to control it on switch, you need to use AD.

Thanks.

Sent from Cisco Technical Support iPad App