Cisco ISE - cannot reach Guest Portal

schoerlin — Mon, 11 Mar 2019 04:20:42 GMT

Hi all,

I have a Cisco ISE server, which is installed on a VMWare plattform. On the ISE server, I configured 2 network cards. One for the Corporate network ( Gigabit Ethernet 0) and one for the Guests (Gigabit Ethernet 1). Because I had problems, I put a client into the Guest VLAN (Wired) and tried to access the guest portal which was not working.

I recognized that the port 8443 for the guest portal is blocked. But I was able to ping the address, and the port 443 and 22 are open as well. On the Gigabit Ethernet 0 network everything works.

All interfaces are activated at the Web Portal Management Settings, for the ports 8443 and 8444.

Anybody an idea??

T&R

Frank

Cisco ISE - cannot reach Guest Portal

Saurav Lodh — Mon, 03 Feb 2014 10:46:30 GMT

Please use the below ISE- guest URL redirection tshoot doc. below

http://www.cisco.com/en/US/docs/security/ise/1.2/troubleshooting_guide/ise_tsg.html

topic Cisco ISE - cannot reach Guest Portal in Network Access Control

Cisco ISE - cannot reach Guest Portal

Cisco ISE - cannot reach Guest Portal