topic Re: ACS 5.4 Can´t see device name in "Live Authentication" in Network Access Control

ACS 5.4 Can´t see device name in "Live Authentication"

hdussa — Mon, 11 Mar 2019 04:18:35 GMT

Hello,

under dashboard i activated "Live Authentication". Under register card "General" i can see the IP-Adress of the switch (authenticator) but not the name. The IP-Adress is not listed under IP-Adress but under NAD.

Under AAA Protocol > RADIUS Authentication it is perfect. Network device and IP-Adress is listed correct.

Is there a way to see NAD in Dashboard?

Regards Horst

ACS 5.4 Can´t see device name in "Live Authentication"

Javier Henderson — Thu, 30 Jan 2014 01:35:46 GMT

Horst,

Can you please attach a screenshot illustrating the problem?

Javier Henderson

Cisco Systems

ACS 5.4 Can´t see device name in "Live Authentication"

Saurav Lodh — Thu, 30 Jan 2014 05:10:50 GMT

follow the authentication report topic which can be customised

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/user/guide/monit_report.html

Re: ACS 5.4 Can´t see device name in "Live Authentication"

hdussa — Thu, 30 Jan 2014 06:18:47 GMT

Javier,

see attachment.

Re: ACS 5.4 Can´t see device name in "Live Authentication"

blenka — Thu, 30 Jan 2014 21:57:50 GMT

List column A tabular or hierarchical view of items associated with a specific configuration

task shows the list column as a list of configured network device

names; the heading of this list column is Name.

Re: ACS 5.4 Can´t see device name in "Live Authentication"

hdussa — Fri, 31 Jan 2014 08:30:55 GMT

Hi,

in the attachment, you can see the IP Adresses of the switches (authenticator) in the column of NAD but not in the column of IP Address.

If you open the Authentication-RADIUS-Today the name and the IP Adress of the authenticator can be seen.

I like to see the IP Adress and the name of the network device.

Regards Horst