topic ASA marking aaa server-group as failed in Network Access Control

ASA marking aaa server-group as failed

erikpavelchak — Mon, 11 Mar 2019 04:16:30 GMT

I'm using ACS 5.4 with our switches and ASAs and for some reason the ASAs in our enterprise keep losing connection to the ACS, this only happens with the ASA and I can login to our switches using the same ACS and policy without a problem. The problem is intermittent

The ACS is on the same vlan as the ASA management interface too

ASA marking aaa server-group as failed

Tarik Admani — Tue, 14 Jan 2014 01:23:21 GMT

What version of code are you running and what is the platform, also can you post the AAA related config (show run aaa)?

Thanks,

Tarik Admani
*Please rate helpful posts*

ASA marking aaa server-group as failed

erikpavelchak — Tue, 14 Jan 2014 19:11:36 GMT

We have various platforms but most are 5505 and 5520. Running code 9.1(1)

aaa authentication ssh console CLEACS01 LOCAL

aaa authentication http console CLEACS01 LOCAL

aaa accounting ssh console CLEACS01

aaa accounting command privilege 15 CLEACS01

aaa-server CLEACS01 protocol tacacs+

aaa-server CLEACS01 (Inside) host 10.100.11.5