topic Why can't I ftp files from my workstation to ISE? in Network Access Control

Why can't I ftp files from my workstation to ISE?

RSundstrom — Mon, 11 Mar 2019 04:13:42 GMT

Hello,

I get this message when I try to upload the ISE 1.2 upgrade files to my ISE nodes local disk...

ISE-01/admin# Copy ftp://<my_workstation_IP_Address>/ise-upgradebundle-1.1.x-to-1.2.0.899.i386.tar.gz. disk:/

Username: rsundstrom

Password:

% Error: Transfer failed

When I enter the 'dir' command at the ISE CLI the filename appears but the the file size is 0 (zero).

I am trying to follow the guidelines for upgrading to V. 1.2. Placing the upgrade files on the ISE local disk is considered to be important.

Any ideas?

Why can't I ftp files from my workstation to ISE?

Tarik Admani — Mon, 30 Dec 2013 23:48:59 GMT

Robert,

Is there a firewall in between your workstation and the ISE server? Also are there any logs from the ftp server that rule out the server from denying the download?

If this is a new spinup of filezilla by default the permissions for the user account you created will have to be looked at.

thanks,

Tarik Admani
*Please rate helpful posts*

Why can't I ftp files from my workstation to ISE?

David Pease — Tue, 31 Dec 2013 13:40:08 GMT

Robert,

I was having major issues with attempting to transfer update files to ISE via FTP as well. After trying numerous things, adn slamming my head into a wall for days, I was able to figure out the answer with a combination of a little guidance from here mixed with "Trial and Error" on my part.

You can view the entire topic here:

https://supportforums.cisco.com/message/4064096#4064096

The copy string that finally worked for me is as follows:

copy ftp://(username):(password)@(FTP Server IP Address)/ise-upgradebundle-1.1.x-to-1.2.0.899.i386.tar.gz disk:/

There REALLY needs to be updated documentation that explans in better detail the FTP copy commands that Cisco allows on the ISE servers, as well as the syntax.

Why can't I ftp files from my workstation to ISE?

RSundstrom — Tue, 07 Jan 2014 20:04:00 GMT

Tarik,

There is no firewall between my workstation and the ISE server. I needed to install an FTP server (FileZilla) on my workstation and then everything worked.

Thanks,

Bob

Why can't I ftp files from my workstation to ISE?

RSundstrom — Tue, 07 Jan 2014 20:06:12 GMT

Hello David,

I was able to get my ftp transfer completed by installing FileZilla on my workstation. I followed your link for references. It helped.

Thanks very much,

Bob

Why can't I ftp files from my workstation to ISE?

Jatin Katyal — Tue, 07 Jan 2014 22:14:29 GMT

Fortunately, I got Bob's case.

In the interest of time we used FTP and will troubleshoot the SFTP problem very soon. Last we tried to connect via ssh sftp-ip username but it gave “shell request failed on channel 0”. In the debugs we could see it was timeing out for some reason.

~BR
Jatin Katyal

**Do rate helpful posts**

Why can't I ftp files from my workstation to ISE?

David Pease — Wed, 08 Jan 2014 13:08:07 GMT

Robert,

You are most welcome. I am a fan pf spreading helpful information when I find it. It is most irritating when you are searching for a problem, see someone with the same issue, and they post "Never mind, I solved it!" and not give any idea what that solution was.

I am glad that my comment helped you with your issue!

Hi guys,One quick question,

Dante Verastegui Noriega — Tue, 11 Nov 2014 17:38:42 GMT

Hi guys,

One quick question, Im having the same problems and Ive tried the solution mentioned here however i get the same error.

How do i use Filezilla for this? I have both the client and server but when i try to connect to my ISE, it doesnt do it.

Id appreciate your help

Sincerely,

Hello Dante,

RSundstrom — Thu, 29 Sep 2016 15:31:20 GMT

Hello Dante,

Make sure Filezilla is started on your desktop.

Copy the file to be transferred into the C:/FTP folder on your desktop workstation.

From the ISE server;

Open a CLI session

From the command line;

Run the ‘dir’ command to view files in the directory.

Make sure there is enough space to store the incoming file.

From the command line;

Enter the command, “copy ftp://(username):(password)@(desktop IP address)/(filename) disk:/

You will be prompted for username (registered with Filezilla).

You will be prompted for password (registered with Filezilla).

The file transfer will happen fairly quickly.

From the command line run the command ‘dir’ to show the directory.

It should have the new file listed.

Compare file sizes from the file stored in C:/ftp to the one in the ISE server.

You may want to make sure there are no firewall issues. Windows Firewall, also.

Basically, this is what I did and it was successful.

This is gold! Thank you.

santiago.jem — Thu, 27 Apr 2017 11:25:42 GMT

This is gold! Thank you.

You are most welcome! Glad

David Pease — Wed, 12 Jul 2017 14:54:13 GMT

You are most welcome! Glad it was of use!

Re: Why can't I ftp files from my workstation to ISE?

Scott_22 — Wed, 17 Apr 2019 00:55:56 GMT

Just ran into this issue on a 2.1.x install. I can attest that you MUST use the URL mentioned here:

copy ftp://example(username):example(username)@10.1.1.20/ise-upgradebundle-2.0.x-2.3.x-to-2.4.0.357.SPA.x86_64.tar.gz disk:/