topic RADIUS or TACACS Server Recommendations in Network Access Control

RADIUS or TACACS Server Recommendations

Scott Hanson — Mon, 11 Mar 2019 04:13:34 GMT

Can anyone point to a good, inexpensive RADIUS or TACACS server solution that runs on Windows? Cisco ACS is a bit more money than is wanted to part with at the moment.

Thanks in advance. All replies rated.

RADIUS or TACACS Server Recommendations

xxkozxx — Mon, 30 Dec 2013 17:55:47 GMT

Windows Server has this built in. You just have to install Network Policy and Access Services on the server and configure it to do RADIUS.

RADIUS or TACACS Server Recommendations

Scott Hanson — Mon, 30 Dec 2013 18:30:26 GMT

Thanks but the Windows Server versions that we have are limited to 50 devices from what the server admin says. There are hundreds of devices we need to authenticate to

RADIUS or TACACS Server Recommendations

xxkozxx — Mon, 30 Dec 2013 19:54:57 GMT

There is also this one:

http://sourceforge.net/projects/freeradius/

RADIUS or TACACS Server Recommendations

Jatin Katyal — Mon, 30 Dec 2013 20:32:23 GMT

I guess that is a case only with W2K3STD where number of radius/aaa clients are limited to 50 only.

NPS provides different functionality depending on the edition of Windows Server 2008 that you install:

Windows Server 2008 Enterprise and Windows Server 2008 Datacenter. These server editions include NPS. With NPS in Windows Server 2008 Enterprise and Windows Server 2008 Datacenter, you can configure an unlimited number of RADIUS clients and remote RADIUS server groups. In addition, you can configure a group of RADIUS clients by specifying an IP address range.

Windows Server 2008 Standard. This server edition includes NPS. With NPS in Windows Server 2008 Standard, you can configure a maximum of 50 RADIUS clients and a maximum of two remote RADIUS server groups. You can define a RADIUS client by using a fully qualified domain name or an IP address, but you cannot define groups of RADIUS clients by specifying an IP address range. If the fully qualified domain name of a RADIUS client resolves to multiple IP addresses, the NPS server uses the first IP address returned in the Domain Name System (DNS) query.

~BR
Jatin Katyal

**Do rate helpful posts**