Cisco ASA Active/ Active

raza555 — Mon, 11 Mar 2019 04:11:21 GMT

Hi,

Can we have ASA in Active/ Active in single context mode.

If Active/ Active is possible in single context mode, then in best practices, Active/Active is prefered or Active Standby.

Thanks

Re: Cisco ASA Active/ Active

Ahmad Murad — Sat, 14 Dec 2013 04:59:27 GMT

Hi,

ASA Active/Active setup can be done only with multiple context mode, you cannot use it in a single mode.

In a single mode only you can have Active/Standby failover.

Also, please move the question to the Firewall section for more discussions.

Thanks.