ACS 4.2 Database replication issue

Rizwan Khan — Mon, 11 Mar 2019 04:48:31 GMT

Hello Experts,

Hope you are all doing well. I need your help in ACS database replication, I want to do replication between ACS servers. The issue i am facing is that there is no error in ACS replication log. It just says outbound replication started. and sits there no other error message is shown. I can successfully telnet secondary server's destination port 2000. But when i hit the replication button from primary server, i do not observe any hit count on my ASA ACL on which i allowed tcp 2000 for destination secondary server.I also checked my syslog server if there is any traffic denied between these 2 ACS servers but found nothing. I also did wireshark captures on the interfaces but no traffic is initiated when i press replicate now button. Initially i thought its a machine issue, but same behavior is shown when i swapped primary----to secondary. There are other applications running on both the servers which requires JAVA. Like Cisco IME etc. Can it be JAVA issue? Please help me out. i am using Release 4.2(0) Build 124 on both servers.Attached below is the Replication LOG snapshot,

Regards,

Rizwan.

https://supportforums.cisco

Venkatesh Attuluri — Thu, 19 Jun 2014 08:41:56 GMT

https://supportforums.cisco.com/discussion/11382366/problems-witch-acs-42-replication

https://supportforums.cisco.com/discussion/11363046/replication-problem-acs-ver-42

topic ACS 4.2 Database replication issue in Network Access Control

ACS 4.2 Database replication issue

https://supportforums.cisco