topic You must set up a Simple Mail in Network Access Control

ISE SMTP authentication

ibrahim_hassan — Mon, 11 Mar 2019 04:46:51 GMT

I am trying to use ISE to send mail to the guest users with their credentials , the problem is ISE didn't use any authentication to use mail account also we can't change the SMTP port on it to allow authentication bypass on SMTP server.

can we request this feature from Cisco?

You must set up a Simple Mail

mohanak — Tue, 10 Jun 2014 09:02:08 GMT

You must set up a Simple Mail Transfer Protocol (SMTP) server to send email notification to the guest user. This server is also used to send email to the short message service (SMS) gateway to deliver the SMS text message.

http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_guest_pol.html#wp1136633

"Failed sending email to the

ibrahim_hassan — Tue, 10 Jun 2014 09:16:51 GMT

"Failed sending email to the following guest users: tmail001. Unknown SMTP host:x.x.x.x"

As per your post, what I

Saurav Lodh — Fri, 20 Jun 2014 13:34:44 GMT

As per your post, what I understand is , you want a phase of authentication if a particular Email ID of Guest is used as recipient of Credentials? Am I correct? If it is something else , could you elaborate what exactly you want to achieve?

Hi Ibrahim, This is a feature

Devrat Kamath — Thu, 14 Aug 2014 02:00:21 GMT

Hi Ibrahim,

This is a feature which is not supported as of now, but as you mention, there is an enhancement open for this.

CSCuc97869 is the enhancement number. Getting in touch with your Sales team will help them build a business case for this and speed up progress on integrating this into ISE.

Best,

Devrat

1.4 and u guys still dont

Przemyslaw Konitz — Tue, 29 Sep 2015 06:54:51 GMT

1.4 and u guys still dont have it? I dont understand that.

From one of my customer perspective they are not allowed to use ISE email notification cause their security policy doesn't allow ISE to just relay emails. We are also forced to change the port but ISE cant do it.

regards

Hi Devrat,

Diego Cairns — Tue, 07 Jun 2016 13:22:22 GMT

Hi Devrat,

Any news on this? We have Gmail as email application, and you can only configure SMTP with START TLS authentication....

Cisco should have this option by default, right?

thanks

For Google mail hosted

jdpratt — Wed, 22 Mar 2017 21:43:27 GMT

For Google mail hosted service use: smtp-relay.gmail.com, set the sender as an internal account. This will work fine.