topic Hi,Scheduling and Saving ISE in Network Access Control

ISE : Generate automatically a report every month

christophe.chetelat — Mon, 11 Mar 2019 04:46:01 GMT

Hello,

We have ISE at work and I would like to know if it is possible to automate the execution of the report : "Guest sponsor summary / 30 days) at the end of each month and save the result as csv file on a windows share ?

Thank you in advance for your help.

Christophe

Refer "Exporting Reports"http

Saurav Lodh — Wed, 04 Jun 2014 08:24:56 GMT

Refer "Exporting Reports"

http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_report.html

Hi,Scheduling and Saving ISE

abwahid — Wed, 04 Jun 2014 16:13:55 GMT

Hi,

Scheduling and Saving ISE Reports

You can customize a report and save the changes as a new report, or restore the default report settings.

You can also customize and schedule ISE reports to run and re-run at specific time or time intervals. You can also send and receive email notifications once the reports are generated.

Note You can save or schedule (customize) ISE reports only by using the Primary PAP nodes.

Step 1 Run a report as described in Running and Viewing Reports.

Step 2 Click Save As in the top right-hand corner of the report summary page.

Step 3 Choose Report or Scheduled Report .

Step 4 Enter the required details in the dialog box.

Step 5 Click Save as New .

You cannot schedule the following reports:

Authentication Summary

Health Summary

RBACL Drop Summary

Guest Sponsor summary

End point Profile Changes

Network Device Session Status

I have seen that in your

christophe.chetelat — Thu, 05 Jun 2014 07:37:23 GMT

I have seen that in your documentation but i do not see where the "Save as scheduled report" is... ?

And one more question :I have

christophe.chetelat — Thu, 05 Jun 2014 09:46:54 GMT

And one more question :

I have a "Local Log Storage period" set to 60 days.

But when i run a report for more than 60 days (query and run), i get data older than 60 days, how is this possible ?

Example :

Guest sponsor summary for the last 60 days

Guest sponsor summary for last 6 months

--> Data are not the same... Is there another setting to configure data retention ?