topic Ise local admin ( CLI ) in Network Access Control

Ise local admin ( CLI )

eric.lessard — Mon, 11 Mar 2019 04:44:30 GMT

hello all,

i have 2 version of ISE installed, one is the NFR one. Both setup are at the same release except for the patch level

on the NFR, i can do: username eric passord remote role admin

the possibility is not available on the other ISE setup. There is no patch installed on the NFR and the one (without that option ) is at patch level 2

so the question is: Why? what do i need to enable that option?

both have LDAP, AD authentication defined.

Thx

HI Eric,checked in my lab ise

Venkatesh Attuluri — Thu, 22 May 2014 15:45:13 GMT

HI Eric,

checked in my lab ise 1.2 patch 8 only syntex availble is

username username password {hash | plain} password role {admin | user] [disabled [email email-address]] [email email-address]

could have this been removed

eric.lessard — Thu, 22 May 2014 16:01:27 GMT

could have this been removed with the patch? i'll try to patch my ISE to see if its still there but i kinda need that feature. Well, it would be usefull