topic Re: CSM 3.2 cannot integration ACS 4.2 in Network Access Control

CSM 3.2 cannot integration ACS 4.2

dkuzmenkov — Fri, 21 Feb 2020 18:21:45 GMT

Hi, All!

I integrating Security Manager 3.2.1 with Cisco Secure ACS 4.2 by the manual.

In the finish step, I get waring:

System Identity User - Not configured properly for (csm,AutoUpdate,rme)

Please, tell me, what me wrong?

Re: CSM 3.2 cannot integration ACS 4.2

bwilmoth — Fri, 01 Aug 2008 20:23:08 GMT

We need more details to determine the problem.

Re: CSM 3.2 cannot integration ACS 4.2

dkuzmenkov — Mon, 25 Aug 2008 08:23:06 GMT

Please, see error

Re: CSM 3.2 cannot integration ACS 4.2

colin.lynch — Mon, 07 Sep 2009 12:50:32 GMT

Click on your system identity account you created on your ACS and then scroll down and put a tick in each of the Apps sections which are mentioned in your error message i.e csm,AutoUpdate and rme.

Obviously to see these apps under your username they must have been pre-registered with the ACS.

Regards

Colin

Re: CSM 3.2 cannot integration ACS 4.2

jan.nielsen — Fri, 11 Sep 2009 19:29:51 GMT

Which means that it will fail the first time you do the register apps in common services, once you apply the settings for the system identity user it should be ok if you try to enable acs mode again.