topic http://www.cisco.com/c/en/us in Network Access Control

Can I add MAC adrreses in Bulk in ISE? I have a huge list of Mac Addresses and I cant add them one by one

minkumar — Mon, 11 Mar 2019 04:43:02 GMT

I have a list of Mac addresses, I cannot add them one by one in ISE. Is there any way I can add the mac addresses in Bulk? Or Also, If you could tell me a way to do MAB with Radius Server?

Minakshi

yes you can import MAC

kaaftab — Wed, 14 May 2014 10:39:37 GMT

yes you can import MAC address kindly check the given link

http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_identities.html

****************Do rate helpful posts**************************

If we remove ISE or Radius

minkumar — Wed, 14 May 2014 11:44:38 GMT

If we remove ISE or Radius server. Is it possible to do Mac Authentication Bypass without ISE or radius server?

http://www.cisco.com/c/en/us

Saurav Lodh — Wed, 21 May 2014 11:20:35 GMT

http://www.cisco.com/c/en/us/td/docs/ios/sec_user_services/configuration/guide/15_0s/sec_securing_user_services_15_0S_book/sec_config_mab.html

Hi Saurabh, The link says

minkumar — Thu, 19 Jun 2014 08:49:57 GMT

Hi Saurabh,

The link says that Radius should be configured in the switch, does that mean we cannot have MAB configured and working without Radius

The switch must have a RADIUS configuration and be connected to the Cisco secure access control server (ACS)

A radius server is needed

Venkatesh Attuluri — Fri, 20 Jun 2014 10:02:29 GMT

A radius server is needed along with switch for MAB to work