topic ACS v4.0 Backup in Network Access Control https://community.cisco.com/t5/network-access-control/acs-v4-0-backup/m-p/526722#M9149 <P>Hi All,</P><P></P><P>Just a quick question on the 'Backup' feature of Cisco Secure ACS 4.0.</P><P></P><P>What exactly does this backup. Does it only backup user and group settings, or does it include Network Access Profiles, Posture Validation settings, etc?</P><P></P><P>Any help would be appreciated.</P><P></P><P>Thanks,</P><P>Cam</P> Fri, 21 Feb 2020 18:15:03 GMT cammaher 2020-02-21T18:15:03Z ACS v4.0 Backup https://community.cisco.com/t5/network-access-control/acs-v4-0-backup/m-p/526722#M9149 <P>Hi All,</P><P></P><P>Just a quick question on the 'Backup' feature of Cisco Secure ACS 4.0.</P><P></P><P>What exactly does this backup. Does it only backup user and group settings, or does it include Network Access Profiles, Posture Validation settings, etc?</P><P></P><P>Any help would be appreciated.</P><P></P><P>Thanks,</P><P>Cam</P> Fri, 21 Feb 2020 18:15:03 GMT https://community.cisco.com/t5/network-access-control/acs-v4-0-backup/m-p/526722#M9149 cammaher 2020-02-21T18:15:03Z Re: ACS v4.0 Backup https://community.cisco.com/t5/network-access-control/acs-v4-0-backup/m-p/526723#M9150 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>Backup &amp; Restore have always been able to handle the entire ACS config.</P><P></P><P>That is to say, if you backed up an ACS, replaced the PC server with another, installed ACS and restored the backup... it should look like the original.</P><P></P><P>Same should be true of 4.0</P><P></P><P>That said there are some options when restoring to offer a partial restore.</P><P></P><P>Darran</P></BODY></HTML> Fri, 17 Mar 2006 11:25:02 GMT https://community.cisco.com/t5/network-access-control/acs-v4-0-backup/m-p/526723#M9150 darpotter 2006-03-17T11:25:02Z