topic how to re-run setup for ISE Application installation in Network Access Control

how to re-run setup for ISE Application installation

Imran Ahmad — Mon, 11 Mar 2019 03:51:04 GMT

Hi,

We have recently purchased ISE devices, i initialized the ise device for the first time and run the Setup wizard.. but while the setup was installing ise application, we had power issue so my ise device got turned off and the ise application was not installed. now how can i re-run the setup and or how to install ISE-application ?

Please give me the instruction

how to re-run setup for ISE Application installation

Ravi Singh — Tue, 03 Sep 2013 06:47:29 GMT

If you are getting console then type Setup command on the console and if not then you have to do the whole installation again. Please follow the instruction given in the below link.

http://www.cisco.com/en/US/docs/security/ise/1.2/installation_guide/ise_ins.html

how to re-run setup for ISE Application installation

Imran Ahmad — Tue, 03 Sep 2013 07:06:45 GMT

can u tell me How can i get a consol connection to ISE ? i couldnt find any instruction on this.

Im using cisco ISE 3315

how to re-run setup for ISE Application installation

Imran Ahmad — Tue, 03 Sep 2013 07:12:44 GMT

sorry i m connected to its consol but i tried typing "setup" but it is not accepting that command

how to re-run setup for ISE Application installation

Ravi Singh — Tue, 03 Sep 2013 07:18:27 GMT

First you have to log in with admin username and password and then run setup. It would work. see the below link

http://www.cisco.com/en/US/docs/security/ise/1.0/install_guide/ise10_ins.html

how to re-run setup for ISE Application installation

Imran Ahmad — Tue, 03 Sep 2013 07:24:34 GMT

Dear Ravi,

the above link is only for while you start configuring ISE devices for the First-time. and im already login through admin user, but there is no setup command availble.

how to re-run setup for ISE Application installation

Imran Ahmad — Tue, 03 Sep 2013 09:16:45 GMT

anyone knows how to get this issue resolved ??? im totally stuck. I dont have any bootalbe dvd of my ise software to start booting from that dvd.

any help plz ?

Re: how to re-run setup for ISE Application installation

Sandeep Choudhary — Tue, 03 Sep 2013 11:46:51 GMT

Hi Imran,

Can you login int to the device via CLI.

If yes then you can configure what you want on this device.

You can see the status of the ise by issuning : sh application status ise

or paste the output of sh run:

Please also check this:

http://www.cisco.com/en/US/docs/security/ise/1.0.4/install_guide/ise104_app_f-installing_on_NAC-AC.html

Regards

Sandeep

how to re-run setup for ISE Application installation

Venkatesh Attuluri — Tue, 03 Sep 2013 12:09:32 GMT

If you are able to login in to ISE cli then you can configure the steps you missing initially . Check the following link for cli commands

http://www.cisco.com/en/US/docs/security/ise/1.2/cli_ref_guide/ise_cli_app_a.html#wp2096421

how to re-run setup for ISE Application installation

Imran Ahmad — Tue, 03 Sep 2013 14:02:44 GMT

i have tried all above links, those are all for when u start ise for the first time.

I can normally login to my ise cli and can see the running config, but while i do sho app status ise, it says ise is not installed.

Although this should be very easy to solve but there is no such intruction by cisco . i couldnt find any doc dont know why cisco has not included it

how to re-run setup for ISE Application installation

Tarik Admani — Tue, 03 Sep 2013 15:55:11 GMT

Imran,

You will have to reimage the appliance to get the setup prompt back. There is no other way to do this.

Thanks,

Tarik Admani
*Please rate helpful posts*

Re: how to re-run setup for ISE Application installation

NetWorkMonster — Thu, 08 Jun 2023 04:57:40 GMT

that's right !

Re: how to re-run setup for ISE Application installation

frederic.mouazer — Wed, 19 Jun 2024 14:06:53 GMT

Hello,

ISE installed on a VMWARE machine, all was right and one day:

show application status ise "application not installed"

I tried to stop application :

application stop ise "stop failed"

I rebooted the VMWARE machine, after 20 minutes:

show application status is okay and the ISE became okay.

Regards,