topic Re: ACS 2.4 (radius) & ACL in Network Access Control https://community.cisco.com/t5/network-access-control/acs-2-4-radius-acl/m-p/18917#M9819 <HTML><HEAD></HEAD><BODY><P>This should help: <A class="jive-link-custom" href="http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Software:Cisco_Secure_ACS_NT" target="_blank">http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Software:Cisco_Secure_ACS_NT</A></P></BODY></HTML> Mon, 05 Nov 2001 14:49:48 GMT k.poplitz 2001-11-05T14:49:48Z ACS 2.4 (radius) & ACL https://community.cisco.com/t5/network-access-control/acs-2-4-radius-acl/m-p/18916#M9818 <P>I'm run a ACS 2.4.3\NAS (radius) dial-in service, and when the dial-in user come in, they are authenticated and given a static IP. </P><P></P><P>What I would like to do is also apply an outward-bound (on the NAS i/f) ACL that restricts the user to only going to destination address's I specify.</P><P></P><P>How is it done, as I don't undertsand how to configure AV pair 242 (assuming it is 242)?</P> Fri, 21 Feb 2020 17:57:43 GMT https://community.cisco.com/t5/network-access-control/acs-2-4-radius-acl/m-p/18916#M9818 p.jacques 2020-02-21T17:57:43Z Re: ACS 2.4 (radius) & ACL https://community.cisco.com/t5/network-access-control/acs-2-4-radius-acl/m-p/18917#M9819 <HTML><HEAD></HEAD><BODY><P>This should help: <A class="jive-link-custom" href="http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Software:Cisco_Secure_ACS_NT" target="_blank">http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Software:Cisco_Secure_ACS_NT</A></P></BODY></HTML> Mon, 05 Nov 2001 14:49:48 GMT https://community.cisco.com/t5/network-access-control/acs-2-4-radius-acl/m-p/18917#M9819 k.poplitz 2001-11-05T14:49:48Z