topic ISE in Network Access Control https://community.cisco.com/t5/network-access-control/ise/m-p/2264091#M99403 <HTML><HEAD></HEAD><BODY><P>There could be an SNMP configuration issue on Cisco ISE, the switch, or both.</P><P>• The profile is likely not configured correctly, or contains the MAC address of</P><P>the endpoint already.</P><P>Verify the SNMP version configuration on both Cisco ISE and the switch for</P><P>SNMP trap and SNMP server settings.</P><P>• The Profiler profile needs to be updated. Navigate to Administration &gt; Identity</P><P>Management &gt; Identities &gt; Endpoints, select the endpoint by MAC address</P><P>and click Edit</P></BODY></HTML> Sun, 21 Jul 2013 11:16:13 GMT Venkatesh Attuluri 2013-07-21T11:16:13Z ISE https://community.cisco.com/t5/network-access-control/ise/m-p/2264090#M99374 <P>Endpoint Does Not Align to the Expected Profile</P> Mon, 11 Mar 2019 03:40:22 GMT https://community.cisco.com/t5/network-access-control/ise/m-p/2264090#M99374 BIKASH KUMAR SHAW 2019-03-11T03:40:22Z ISE https://community.cisco.com/t5/network-access-control/ise/m-p/2264091#M99403 <HTML><HEAD></HEAD><BODY><P>There could be an SNMP configuration issue on Cisco ISE, the switch, or both.</P><P>• The profile is likely not configured correctly, or contains the MAC address of</P><P>the endpoint already.</P><P>Verify the SNMP version configuration on both Cisco ISE and the switch for</P><P>SNMP trap and SNMP server settings.</P><P>• The Profiler profile needs to be updated. Navigate to Administration &gt; Identity</P><P>Management &gt; Identities &gt; Endpoints, select the endpoint by MAC address</P><P>and click Edit</P></BODY></HTML> Sun, 21 Jul 2013 11:16:13 GMT https://community.cisco.com/t5/network-access-control/ise/m-p/2264091#M99403 Venkatesh Attuluri 2013-07-21T11:16:13Z